Fitting Instructions
Applying your self adhesive vinyl signwriting.
WHAT YOU NEED
1 PREPARATION
The most important step is the preparation.
Start by washing the vehicle with dish soap to remove any grease, wax and dirt.
Be sure to thoroughly clean the area where the stickers are going.
After this dry the vehicle.
2 ALIGNMENT
Start by arranging the signwriting on the vehicle using masking tape or magnets.
Check your signage is straight by measuring to a solid body line and take a step back to confirm it looks straight.
Always align/measure from the lettering or straight lines that are marked on the application tape.
Please note the outer edge of the backing paper is not straight.
- Squeegee
- Masking Tape
- Ruler/Tape Measure
- Scissors/Craft Knife
- Your Proof Image (Sent Via Email)
1 PREPARATION
The most important step is the preparation.
Start by washing the vehicle with dish soap to remove any grease, wax and dirt.
Be sure to thoroughly clean the area where the stickers are going.
After this dry the vehicle.
2 ALIGNMENT
Start by arranging the signwriting on the vehicle using masking tape or magnets.
Check your signage is straight by measuring to a solid body line and take a step back to confirm it looks straight.
Always align/measure from the lettering or straight lines that are marked on the application tape.
Please note the outer edge of the backing paper is not straight.
3 DRY APPLICATION CENTER HINGE METHOD
Check out our video for the "center hinge method" This is the method we use on vehicle applications.